Challenge
The goal is to provide a process for the scribing of the molybdenum layer (P1), without changing the underlying insulating layer and to enable structuring of CIGS (P2) parallel to (P1) without affecting the molybdenum layer. This allows parallel removal of transparent conducting oxides (TCO) (P3) without sacrificing other layers. The three scribes are characterised by a depth of less than 50 µm at a processing speed of 2 m/s.
Benefit
Multitel will assess the use of new pulsed lasers, combining performance and low investment cost to gain expertise on the integration of such lasers into fully controlled machines for solar cell production. In addition to that, Lasea focuses on demonstrating the feasibility of using the new laser sources for thin film solar cell production. The benefits include:
- Provide the end user SSE a set of objectives for photovoltaic scribing.
- Increase the photovoltaic conversion efficiency of modules produced in fully-automated in-line machines to minimise the amount of scribing.
- Reduce the distance between the modules and the amount of damage caused by the heat affected zones on the edges of the grooves.
- Increase the reproducibility of the laser structuring compared to the cuts made by mechanical or chemical methods.
- Enhance the productivity of the manufacturing system by running at speeds of 5-6 m/s.
Achievement
Supplier Multitel has produced a machine suitable for solar cells manufacturing. Connecting the different layers in a proper way generates electricity from sunlight. What does this process require? Each layer is scribed in order to define individual cells connected in series. Laser technology proves to be the most efficient and precise tool for that. The successfully implemented laser is capable of providing a laser beam of two different wavelengths: one in the infrared range and the other in the visible range. As of yet, the machine is still in its developmen stage with the goal to optimise the processing speed – for example by using lighter construction and varying shape and size of the mirrors used. The system is designed and manufactured in such a way that it can be easily integrated in Lasea machine. From an economic perspective, end-user SSE expects an immense reduction of production costs of up to 67 %. Laser-based scribing of solar cells holds the enormous advantage of being less error-prone than mechanical or chemical methods. The system developed in the FCPS assessment can even be applied beyond thin-film solar cells processing in the future.
Project:
LASHARE
Enterprises:
Sector
Electrical & optical equipment
Keywords
Laser
